Brake, Break, and Break

A couple of weeks ago, I acquired another loom.

I was not actively looking for a loom, but Facebook has this local marketplace that pops up to feature what neighbors have for sale. I check it occasionally to see if I can find a small table and chairs for the younger daughter, a high school Sophomore, to use when she heads to college. I like to plan ahead.

Occasionally, I come across something of weaving interest there.

A few months ago, there was a Schacht 25" 8-harness table loom with stand, just like the one I used to have!  I mentioned it to a good friend of mine. She bought it.

That was the first loom I came across on that page.

There are also a couple of groups on Facebook, which feature "Fiber Equipment for Sale" and "All Fiber Equipment for Sale," as well as an "8 Shaft Weaving" group and a "4 Shaft Weaving" group, where I expect to find looms and equipment. In fact, I bought the Glimakra warping mill from one of those groups (and made a friend in the process, as the seller is an awesome lady). (I used quotation marks around the names of the groups, in case anyone is interested in joining them.)

The second loom I found on the local market page was a Leclerc Nilus. These are the photos from the listing:






My first floor loom was a Leclerc Artisat 36" 4-harness made in 1970. She was a sweet loom. However, at the time, I wanted a bigger and heavier loom on which to make rugs, and she was a bit too light weight for that endeavor.

What I like about Leclerc is they provide parts for nearly every loom made in their 125 year history. That is pretty impressive.

I also emailed them with the serial number of the loom.  The owner of the company, Monsieur Brassard responded personally and said:  "Nilus 36" made in March 1978.  Francois"

Obviously he is a very busy man of few words.

As can be seen from the photos, this particular loom was in rather sad shape. There was plenty of rust and a missing crank handle, but she appeared to be structurally sound.

The thought process was this:  I now have a Macomber loom on which I am able to weave the finest of lace, as well as durable rugs. It is also massive at 56" wide. My issue was not to replace the Macomber (Let me be perfectly honest, the Macomber is a DREAM loom, and I have no intention of ever parting with it), but the ideal weaving studio, which existed in my mind, included a smaller secondary loom on which to do small to mid-size projects while the Macomber did the all the beefy lifting.

When I contacted the seller to inquire of the loom, she explained she had posted the listing on behalf of her grandfather. The loom belonged to her grandmother who had dementia. Neither the lady, nor her grandfather knew anything about the loom. She asked me to make an offer.

After a bit of research regarding how much 40 year old Nilus looms were selling for in excellent condition, as well as trying to guess how much it would cost to get her up and working, I gave her an offer. She and her grandfather accepted it.

When the husband and I went to retrieve it, the people were lovely and nice; however, instead of being stored in a garage, it had actually been in a barn. I could see where they had knocked off several dirt dauber nests on the sectional beam, but there were a couple more in the lam box. There was no crank, the gentleman asserted it had not come with one. The heddles were once new and due to the strings running through several bunches on them, they may have never been used; however, they were badly rusted, along with the brake circle, and all of the section brackets on the warp beam.

Surprisingly, there were no signs of water damage.  The wood looked great, and she was still sturdy.

The handsome husband paid the man, and we loaded her up:


At about 175 pounds, she was far easier to move than the 400 pound Macomber beast!

We brought her into the foyer, as soon as we got home, and I got busy cleaning her up.  Three hours were spent cleaning before I could apply the first coat of Howard Feed-N-Wax. 

She shined from the attention:


After a thorough inventory of what I thought she needed, as well as a couple of luxury items, I placed an order with Camilla Valley Farm.

While I could have ordered directly from Leclerc (they are both in Canada), I opted for Camilla Valley Farm because their website helps identify a loom, gives the history of every loom ever made by Leclerc, and they have an exhaustive collection of loom manuals. PLUS, instead of just a list of replacement parts, they provide photos, which helped me identify which parts I needed. 

As I found out later, their customer service was also most excellent.

From order placement to delivery was just shy of two weeks.

While I waited for the replacement parts to arrive, I did what I could to prepare the loom.

The brake circle was completely rusted. To ensure I put the brake back, I took a photo to see how it was attached.


Unfortunately, once I got the new brake circle and put the warp beam back on, it did not work.  

I was not happy.

I then looked at the photos on the relevant Camilla Valley Farm parts page and discovered the brake system was not properly attached (the right side of the photo):


Thus, I reattached everything according to the photo.

Next, I turned my attention to the warp beam. Below was the original sectional beam with very rusted brackets:




Here is the after:


Here she is with her new hardware and back on the loom:


Yesterday morning, I rose early and attached a new apron to the cloth beam. After breakfast, the sweet and handy husband helped me to attach the new bumpers and the jack supports, which required the use of power tools. He also cut to size four steel rods for the warp and cloth beams.

It may not sound like much, but he worked HARD!  I am fortunate he is willing and capable.

The original plan was for him to then add harnesses #7 and #8 to the Macomber (she actually holds 10), but he had worked hard (especially using a hacksaw to cut the steel rods, then grinding the ends smooth) and I was anxious to dress the Leclerc with a warp, that I asked him to work on the Macomber next week.

The new brake system appeared to work well enough for me to warp the back beam. 

I spent most of the afternoon and evening threading heddles and sleying the reed. 

About 10 o'clock last night, I finally tied the ends and was able to begin weaving:


It was a grand moment!!

Unfortunately, it was also short-lived.

When I attempted to advance the warp, the ratchet pawl for the take up motion handle, which is made of cast aluminum, broke in three pieces.

Here is a photo from Camilla Valley Farms. The actual piece is identified as "B."


Needless to say, following the Brake issues and the Break of the pawl, weaving on the Nilus is now on Break while I await another part...

However, I am delighted with the loom. With a little more love and attention, she will be an awesome companion. 

Leclerc looms are made of Canadian maple. In the photo directly above, the wood is new and light in color.  As this hardwood darkens over time, I have to admire what a lovely and deep shade my little beauty has acquired with her age.

Last year I went to a Weaving Boot Camp with Susan at Yarnorama in Paige, Texas and sat on an older Leclerc bench for three days. At the time, I thought it would be a little too short for the Macomber (or I would have bought it then). As soon as I moved the Leclerc into my studio, I knew I had to have that bench. I called, and Susan agreed to sell it to me at a price that reflected its age and use!  (New they are $505!) A few days later, a dear, sweet friend collected it and brought it to me!

The dream studio is now complete!!


I simply could not be more pleased or grateful!

Comments

9crafty11 said…
I've been a lurker for many years, & thought I'd finally comment! I don't weave, but I certainly can hear the enjoyment you had reviving the loom you acquired, & very lucky to have a husband supporting you as well! Enjoyed this post very much!!
Feisty said…
Thank you, Lady!! So pleased to know you are out there.
Anonymous said…
Thank you for shareing your experience! I have just acquired a Leclerc Artisat 36" loom that was originally purchased in the 70s. It's also missing the crank and the bolt that holds it but other than that there is very little odor and no rust! I've been debating what to use to clean the dust accumulation and to treat the wood. You used water and vinegar for the whole loom? Janice
Feisty said…
Congratulations, Janice!!

I actually used Weiman's Furniture Cleaner to clean the hard wood parts of the loom, followed by Howard Feed n Wax. I applied to Feed n Wax twice.

However, in retrospect, it would not have been a bad idea to wipe the entire thing down in the vinegar/water mixture, allow it to dry, then do the Weiman's and Feed n Wax.

:)
Unknown said…
Hi--thank you for this post. I believe I have the same loom. How does one attach the warp to the warp beam in the back? I am familiar with using an apron and apron rod, but this loom only has an apron in the front. BTW--I am warping front to back. thanks for any input you may have! Rosie
Unknown said…
I am about to acquire a turn of the century loom I have never used one myself I saw it listed for free on my local Fb marketplace and I must say that I'm very excited to acquire this I had no idea the capabilities that this machine had but I imagine that once fixed it will be very cool to operate I will comment back with photos as I will definitely need advice on how to fix this and get it in working order also to find out when it was made and where it came from your story is awesome and has definitely inspired me to definitely grab this piece and work on it ty so much for sharing I hope to share my adventure as well soon. Ty again
Feisty said…
How exciting!

You are on the edge of a deep, interesting, and fun rabbit hole. I wish you luck!

Popular Posts